It appears that you are using an out-of-date web browser which may not be compatible with this website. Please upgrade your web browser toFirefox,Chrome, orLatest Internet Explorer.

Adjustable Braces and Hinges

Sasco’s Adjustable Braces and Hinges are part of the Sasco Metal Framing System and can also be used as part of an engineered seismic restraint system. For assistance on seismic restraint design, refer to the Sasco Seismic Restraint Design Manual, or contact Sasco. Loads are limited by the slip strength and pull out strength of the clamping nut.


Adjustable Hinges:

Hinges rotate on 1/2” bolts using nylon insert nuts to prevent loosening. Holes are spaced on 1 5/8” (41.3 mm)
centres.

SR292A-EG.png

SR292A-EG

SR293A-EG.png

SR293A-EG

SR294A-EG.png

SR294A-EG


Adjustable Braces:

Each brace fastens to strut via two 9/16” dia. (14.3 mm) holes. Parts hinge on 1/2” bolts using nylon insert nuts to
prevent loosening. Holes are spaced on 1 7/8” (47.6 mm) centres.

SR298A-EG.png

SR298A-EG

SR299A-EG.png

SR299A-EG


General Data:

Holes 9/16” (14.3 mm) dia. centred 13/16” (20.6 mm) from ends. Steel is 1 5/8” (41.3 mm) wide and 1/4” (6.4 mm) thick.

This product comes in the following finishes:

Product Suffix:

Electroplated Zinc (Standard) EG

Hot Dip Galvanized (Available Upon Request) HG

Standard Finish is defined by the suffix shown while other finishes are also shown. Many of these other finishes are stocked, however some may require custom manufacturing.