It appears that you are using an out-of-date web browser which may not be compatible with this website. Please upgrade your web browser toFirefox,Chrome, orLatest Internet Explorer.

Beam Clamps

S948 Series

S948 Series

Catalogue
No.

3/8” U-bolt Length* 3/8” J-hook Length*
(In) (mm) (In) (mm)
S948SBC-6EG 3 3/4 95.3 6 152.4
S948SBC-8EG 3 3/4 95.3 8 203.2
S948SBC-14EG 3 3/4 95.3 14 355.6
S948LBC-6EG 5 3/8 136.5 6 152.4
S948LBC-8EG 5 3/8 136.5 8 203.2
S948LBC-14EG 5 3/8 136.5 14 355.6
S949 Series

S949 Series

Catalogue
No.

3/8” U-bolt Length* 3/8” J-hook Length*
(In) (mm) (In) (mm)
S949SBC-6EG 3 3/4 95.3 6 152.4
S949SBC-8EG 3 3/4 95.3 8 203.2
S949SBC-12EG 3 3/4 95.3 12 304.8
S949LBC-6EG 5 3/8 136.5 6 152.4
S949LBC-8EG 5 3/8 136.5 8 203.2
S949LBC-12EG 5 3/8 136.5 12 304.8

S948SBC and S949SBC series for use with Sasco Single and Combination Strut Channels 13/16” to 1 5/8”.
S948LBC and S949LBC series for use with Sasco Single and Combination Strut Channels 2 7/16” to 3 1/4”.


S954BC / S955BC

S954BC-EG
S955BC-EG

Used between column flanges. No welding required. The length of strut channel is the inside beam width less 1” (25.4 mm).

Part No.
for Channel

Pullout Resistance Slip Resistance
(Lbs) (kg) (Lbs) (kg)
S954BC used in S2 1000 454 800 363
S954BC used in S3 500 227 300 136
S954BC used in S4 700 318 500 227
S955BC used in S5 1000 454 800 363

 

Other sizes and finishes available. Must be used in pairs.


S942BC-EG

S942BC-EG

For use with Sasco Strut Channel 13/16” to 1 5/8”.

Design load* 1000 lbs (455 kg) each. Must be used in pairs.

 

 

S943BC-EG

S943BC-EG

For use with Sasco Strut Channel 2 7/16” to 3 1/4”.

Design load* 1000 lbs (455 kg) each. Must be used in pairs.

 

 

S938BC-EG

S938BC-EG

Use with 1 5/8” x 1 5/8” Strut Channel.

Design load* 480 lbs (220 kg) each. Must be used in pairs.

 

 

S937BC-EG

S937BC-EG

Channel Gauge Design Load* (ea.)
(Lbs) (kg)
12 600 270
14 500 225
16 450 205

Requires 1/2” Clamping Nut and bolt (not incl.).

Must be used in pairs.

 

 

S953BC-HG

S953BC-HG

Design load* 500 lbs (225 kg) each. Must be used in pairs.

Requires 1/2” Clamping Nut and bolt (not incl.).

 

 

S936BC-HG

S936BC-HG

Channel Gauge Design Load* (ea.)
(Lbs) (kg)
12 600 270
14 500 225
16 450 205

Requires 1/2” Clamping Nut and bolt (not incl.). Must be used in pairs.

 

 

S950BC-HG

S950BC-HG

Design load* 450 lbs (205 kg) each. Must be used in pairs.

 

 

S952BC-HG

S952BC-HG

Design load* 900 lbs (410 kg) each. Must be used in pairs.

 

 

S902BC-HG

S902BC-HG

One 1/2” x 1 3/4” SHSS incl. All holes 9/16” dia. (14.3 mm)

 

 

S900BC-HG

S900BC-HG

One 1/2” x 1 3/4” SHSS incl. All holes 9/16” dia. (14.3 mm)

 

 


Typical Uses of the Above Beam Clamps

Typical Use of Beam Clamp

Design Load 500 lbs (227 kg)

Typical Use of Beam Clamp

Design Load 500 lbs (227 kg)

Typical Use of Beam Clamp

Design Load 500 lbs (227 kg)

Typical Use of Beam Clamp

Design Load 300 lbs (136 kg)



Dimensions are to outside edge unless otherwise indicated.
All holes for attachments are 9/16” (14.3 mm) diameter.
*U-bolt and J-hook lengths are measured to the inside of the bend.

 
 

S990 Series Beam Clamps

S990 Series

Catalogue No. J-Hook Length* Design Load
 (Inches) (mm)  (Inches) (mm)
S997BC-HG 11 279.4 4 - 9 101.60 - 228.6
S999BC-HG 19 1/2 495.3 7 - 17 117.80 - 431.8

Design load 800 lbs (363 kg)

S984 Series Beam Clamps

S984 Series

Catalogue No. J-Hook Length* Design Load
 (Inches) (mm)  (Lbs) (kg)
S984-126EG  2 1/2 - 6  63.5 - 152.4 500 225
S984-129EG 5 1/2 - 9 139.7 - 228.6 500 225
S984-1212EG  8 /12 - 12 215.9 - 304 500 225

Includes one 1/2” hex nut and J-hook.
Threaded rod and additional nuts must be ordered separately.
Design load 450 lbs (205 kg).
Standard finish is electroplated zinc (EG)



Dimensions are to outside edge unless otherwise indicated. 
All holes for attachments are 9/16” (14.3 mm) diameter.
*U-bolt and J-hook lengths are measured to the inside of the bend.

 
 

Safety Straps

Safety Straps

Used with S902BC and S900BC. Standard finish
is pre-galvanized (G).

Catalogue No. L Design Load
(In) (mm) (In.) (mm)
S930BC-G 9 228.6 6 152.4
S931BC-G 12 304.8 9 228.6
S932BC-G 15 381.0 12 304.8
S933BC-G 20 508.0 16 406.4

This product comes in the following finishes:

Product Suffix:

Hot Dip Galvanized After Fabrication HG

Electroplated Zinc EG

Stainless Steel Type 304 SS4

Stainless Steel Type 316 SS6

Standard Finish is defined by the suffix shown while other finishes are also shown. Many of these other finishes are stocked, however some may require custom manufacturing.