It appears that you are using an out-of-date web browser which may not be compatible with this website. Please upgrade your web browser toFirefox,Chrome, orLatest Internet Explorer.

Crossing Connections

To assist in the selection of the proper fitting for your application, Sasco fittings, many of which have multiple applications, are grouped according to their most common use.

S536W-HG

Five Hole Wing Fitting

S536W-HG

 

 

S537W-HG

Eight Hole Wing Fitting

S537W-HG

 

 

S205A-HG

Two Hole Angle

S205A-HG

 

 

S209A-HG

Three Hole Angle

S209A-HG

 

 

S315Z-HG

Z-Shaped Angle


Catalogue No. L
S315Z-HG 3 1/4" 82.6 mm
S313Z-HG 2 7/16" 61.9 mm
S309Z-HG 1 5/8" 41.3 mm
S312Z-HG 1" 25.4 mm
S301Z-HG 13/16" 20.6 mm

 

 

S205A-HG

Four Hole Angle

S235A-HG

 

 

S230A-HG

Five Hole Angle

S230A-HG

 

 

S425U-HG

U Shaped Fitting


Catalogue No. L
S425U-HG 3 1/4" 82.6 mm
S424U-HG 2 7/16" 61.9 mm
S421U-HG 1 5/8" 41.3 mm
S420U-HG 1" 25.4 mm
S419U-HG 13/16" 20.6 mm

 

 

S212A-HG

Three Hole Angle

S212A-HG

 

 

S214A-HG

Four Hole Angle

S214A-HG

 

 

S216A-HG

Five Hole Angle

S216A-HG


S216A-HG Left Hand (shown)
S215A-HG Right Hand

 

 

S113P-HG

Three Hole Flat Plate

S113P-HG

 

 

S111P-HG

Three Hole Flat Plate

S111P-HG

 

 

S121P-HG

Five Hole Cross Plate

S121P-HG

 

 



This product comes in the following finishes:

Product Suffix:

Hot Dip Galvanized After Fabrication HG

Electroplated Zinc EG

Stainless Steel Type 304 SS4

Stainless Steel Type 316 SS6

Standard Finish is defined by the suffix shown while other finishes are also shown. Many of these other finishes are stocked, however some may require custom manufacturing.


General Data (In) (mm)
Hole Diameter 9/16 14.3
Hole Spacing from End 13/16 20.6
Hole Spacing on Centre 1 7/8 47.6
Width 1 1/2 38.1
Thickness 1/4 6.4


Dimensions are to outside edge unless otherwise indicated.